Can I staple down 1/2 inch engineered hardwood over glued down vinyl flooring on plywood? - recommend 1/2 plywood for granite tile
Wood, 5 cm wide and 1 / 2 scraped "thick birch hand. Manufacturer recommends 18 to 1 1 / 4" staples with 1 / 4 "crown.
Recommend 1/2 Plywood For Granite Tile Can I Staple Down 1/2 Inch Engineered Hardwood Over Glued Down Vinyl Flooring On Plywood?
3 comments:
If the vinyl is placed directly on the surface of wood, so I will be in good standing with the brackets of size. If the vinyl is thin on a ground Luan then go to 1 1 / 2 "staples. 3/8ths The thin" wood to make a 1 "staples.
. This is a special Nailer (stapler), which can be rented. Takes some use, but for the great works of wood products.
All the questions you can e-mail via my avatar. GL
If the vinyl is placed directly on the surface of wood, so I will be in good standing with the brackets of size. If the vinyl is thin on a ground Luan then go to 1 1 / 2 "staples. 3/8ths The thin" wood to make a 1 "staples.
. This is a special Nailer (stapler), which can be rented. Takes some use, but for the great works of wood products.
All the questions you can e-mail via my avatar. GL
Wood flooring must help in general, low humidity and some materials to complete them. If there is nothing under the floor of vinyl or simply follow the word is a lot of noise when walking on them.
I want to achieve with the manufacturer and see what they recommend in the earth.
I am also sure that the PVC flooring seems, there is mold, water or some other type of damage, the vinyl bladder and cause damage to your new home can.
Other elements should that be sure to put on the linoleum floor.
Post a Comment